Helukabel OZ-HF 300/500V PVC Drag Chain Cable – 2x2.5 – 15073

Manufacturer: Helukabel

Technical Data

• PVC drag chain cable, in alignment with DIN VDE 0285-525-2-51 / DIN EN 50525-2-51
• Temperature range flexible -10°C to +80°C
• fixed -40°C to +80°C
• Nominal voltage AC U0/U 300/500 V
• Test voltage core/core 4000 V
• Breakdown voltage 8000 V
• Minimum bending radius flexible 7.5x Outer-Ø
• fixed 4x Outer-Ø

Cable Structure

• Copper wire bare, extra finely stranded acc. to DIN VDE 0295 Class 6 / IEC 60228 Class 6
• Core insulation: PVC, compound type Z 7225
• Core identification acc. to DIN VDE 0293-334, black cores with consecutive labeling in white digits
• Protective conductor: starting with 3 cores
• G = with protective conductor GN-YE, in the outer layer
• x = without protective conductor (OZ)
• Cores stranded in layers with optimally matched lay lengths
• Fleece wrapping over each stranding layer
• Outer sheath: oil-resistant special PVC acc. to DIN VDE 0207-363-4-1 / DIN EN 50363-4-1 (compound type TM5)
• Sheath colour: grey (RAL 7001)
• Length marking: in metres

Properties

• resistant to: oil
• suitable for use in drag chains
• the materials used during manufacturing are cadmium-free, contain no silicone and are free from substances harmful to the wetting properties of lacquers

Tests

• flame-retardant acc. to DIN VDE 0482-332-1-2 / DIN EN 60332-1-2 / IEC 60332-1-2
• oil-resistant acc. to DIN VDE 0473-811-404 / DIN EN 60811-404 / IEC 60811-404
• certifications and approvals: EAC

Application

• A highly flexible PVC drag chain cable used for installation in dry and damp rooms, but not outdoors.
• Used for frequent lifting and bending stress in machine and tool construction, in robotics and on permanently moving machine parts.
• With free movement, without tensile stress and without forced motion control capabilities, these cables have proven their reliable performance in drag chain applications.

Notes

• the conductor is metrically (mm²) constructed, AWG numbers are approximated, and are for reference only
• cleanroom qualification tested on analog types; please note “cleanroom qualification” in your order
• for use in energy supply systems:
• 1) the assembly instructions must be observed
• 2) for further application parameters, please refer to the selection tables
• 3) for special applications, we recommend contacting us and using our data entry form for energy supply systems

Legal notice: Images and technical data are sourced from official Helukabel documents. All rights remain with HELUKABEL® GmbH. Specifications may change without notice; despite careful preparation, errors cannot be fully excluded.